Month: April 2022

Many of us have observed stones that carry a light within them. It gives a gorgeous and captivating appearance. It’s fascinating to consider how well this form of lightning could be tied to numerous objects, such as wallpapers and stones.

It enhances the aesthetics of your residence, patios, driveway, and so on. Installing an outdoor lighting fixture on stone can be done in various ways. We’ll go over the various options and learn the easy installation techniques for outdoor light fixtures.

An Easy Guide on How to Install Outdoor Light Fixture on Stone

Picking the Right Light

Before you purchase a light, it is crucial to ensure that the light is durable and easily maintainable without the threat of breaking. For outdoor lighting, high-quality matters a lot as one light should last you for years.

Another significant factor to consider is the wattage of the light. The higher the wattage means higher chances of long-lasting durability. The lower the wattage equals less longevity.

Installation of the Fresh Bracket

If there’s already lighting installed on the stone, the primary job is to take them off and switch off the electricity to avoid shock. These lights come with two small screws on each side; you only have to pull them out from there and then install the bracket using two screws.

If the screws exceed the length of the drilled hole, you can shorten them by using a screw cutter. After that, mount the bracket using these screws and fix it securely with pliers.

Wire it up

With three types of wires, black, white, and ground wire, you will prioritize the ground wire first when you wire them all up. With the help of wire nuts, you catch the wires and ensure they are tightened up.

Using electrical tape, you will cover them. The electrical tape will keep the moisture far away from the wing nuts. Even for commercial outdoor lighting, it is necessary to do this step as the atmosphere keeps changing, and there’s always moisture or water outside that might enter inside it.

We’re now set to install it in place and double-check if our light is working before installing. If everything signals a green light, you may proceed to fix it in the mount and screw the caps on and make sure they’re securely fastened.

Add Sealant or Fillers

Fillers must be added only at the sides and the top of the cap but never below, i.e., the bottom side. Because whatever moisture or water collects in it, it’ll drain out through the bottom. Utilizing a small amount of silicon, you will fill out the top side and either side of the cap.

To give it a tidy look, don’t use an excessive amount of the sealant as it’ll be visible from both the top and sides.

Place the Sensor

The last thing left to do is to install a sensor. The sensor is aligned on the upper end of the lighting setup.The sensor detects the dimness of the environment and automatically switches on. By installing a sensor on your commercial outdoor lighting, you wouldn’t need a socket or an external plug to turn the lights on.

Conclusion

Outdoor lighting fixtures are a beautiful and aesthetic way to enhance the look of our gardens, houses, garages, or outside our businesses. At times, the only issue that arises is that this sort of lighting becomes the cause of fires and various electrical mishaps.

However, there’s nothing to sweat about if you know how to install outdoor light fixture on stone. Stone lighting installations look complicated, but it isn’t. Nevertheless, seeking assistance from a professional is always a safe and secure alternative you can take any time.

Also Read: Best Lighting Contractor in Chicago

To enhance one’s business many people go for a neon sign as they are eye candies and help in attracting a lot of customers. However, it is a fact that the life span of neon signs is very limited and usually fails after some time. In such scenarios replacing the neon sign can be a little harsh on the pocket. Therefore, Nuer Lighting has come up with a solution to repair your neon signs and save the day! We are a brand that is the ultimate solution for all your lighting problems.

You must be wondering: How much does neon sign repair cost?

We all know that while buying a new neon sign, one needs an investment of hundreds of dollars. Moreover, if it is a problem of just flickering, then replacing it is not a good choice. So, if you are going for a repair, then its price must be cheap, so it does not create a deep hole in your pocket. In this case, we are more than happy to tell you that we are offering a low-cost neon sign repair that will make your day! We will make sure that your neon sign looks as good as new.

How much does neon sign repair cost?

This also depends upon the problem which is defecting the light. For instance, if the problem is related to the intensity of light, it can be easily resolved by changing the transformer or connection in the sign. Similarly, if the glass of the neon sign is broken, it will lead to leakage of gases and unsatisfactory results. These fixtures can be done with an investment of some dollars. Yet the other factor that can lead to a higher repair cost is the intensity of the design. If your neon sign consists of logos or if the brand’s name consists of different shapes. Such technicalities can lead to variations in the pricing of the repair cost.

Neon sign repair is no big deal

Power fluctuation is also a huge cause for a neon sign to fail and not work properly. One needs to have a consistent power supply, to make its neon sign work for a long time. Thus, the benefits of taking our services are that we provide light with lower power consumption and increased longevity. The lights that are repaired by us emit less heat and you can easily maintain it.

Conclusion

So, if you are looking for a neon sign repair platform, your search comes to an end. Because we provide top-notch services at a price that will be a sigh of relief for you. Nuer guarantees you to repair your product with the best material and technicians that are specialized in their jobs.

We are a company of people that provides all the services regarding signs. From cleaning the signs, adding new colors to the display, or replacing the neon tubes, we are here to serve you. Then what are you waiting for? Contact us today to get the best neon sign repair that would make your business shine like a star.

Nuer Lighting

Nuer lighting has been earning the trust of its customers for decades and has been a successful reference for all of them. With their experienced, highly knowledgeable and professional team, they have managed to build a long line of trusted partnerships with their long-term clients. Their professionalism has gained them, loyal customers. With their eye-catching designs and brilliant bright colors, their customers love coming back for more designs.

Sign installation, signage repair, maintenance, and various other lighting services have made Nuer Lighting a go-to company for all sorts of lighting facilities and services. They have specialized in all fields from industrial lighting, public lighting, car park lighting, domestic lighting, neon sign installation, and many more. They have the best prices and offer a one-on-one consultation call with an experienced expert who will guide you in making the best lighting decision.

Neon Art Signs Co.

Neon Art Signs Co. specializes in producing visual, artistically compelling, and high-quality, excellent durability signs since its inception. Their works portray their individuality where they showcase their artistic and aesthetic talent. They work for a variety of signs ranging from neon to vinyl graphics, channel letters, graphic designs and so on.

Apart from designing the signage that is best suited for each company, the business also offers free consultation calls. They are also offering assistance in permits that buildings require when having an installation done. Their catchy signs have won the hearts of customers from all over Chicago. The director guides the clients around and helps them in selecting the best fitting choice for their case.

Omega Sign & Lighting

Being a family brand running successfully for three consecutive generations, Omega Sign & Lighting is best known as one of the most popular sign companies in Chicago. They offer twenty-four-hour emergency repair services and are the only company in all of Chicago that provide full rappel amenities. They offer the highest quality of workmanship in the installation and manufacturing of their signs.

Their technicians are incredibly knowledgeable and possess excellent proficiency regarding anything that has to do with signage. They fabricate, as well as provide sign installation with exceptional and quality services and products. Custom signs are their best forte and they are deeply loved by the clients for their easy-going procedures.

Best Neon Sign

The company is heavily focused on giving its customers the best cost-effective solutions to all signage installations and problems.

They deliver the best signage services in Chicago and cover every field of dazzling sign lights. From LED displays, and channel lettering to customize signs, Best Neon Sign delivers their best to match their client’s company aura within their said budget. Their custom quote assists their customers in determining and selecting the specific sign type for their business.

Splendid shapes, dazzling colors, and classy and aesthetic designs are their forte in alluring customers towards their client’s business and they don’t disappoint at all!

Right Way Signs Chicago

Hand-painted signs, sign painting, LED signage, murals, neon signs, vinyl signs, ADA signage, pin-mounted lettering, large format graphics, and bronze plaques, there’s nothing that Right Way Signs cannot do right!

Being in business for over 50 years, Right Way Signs has been one of the most renowned and trusted signage companies in all of Chicago. They offer one of the best high-quality signs with different domains such as hand-painted signs, painted murals, and ghost signs.

Their designs are extremely aesthetic and pleasing to the eye and people are instantly drawn to them because of their eye-catching beauty. If you want to win the game, Right Way Signs is your place to be!

Read: How to Install Outdoor Light Fixture on Stone

Not all neon signs are constructed to the same quality, after all! The good news is that most neon signs can be fixed, but they must first fulfill specific requirements. Like most fixes, it all depends on what is wrong with the system and how hard it is.

A specialist can usually tell whether you have a voltage problem or if something is amiss with the transformer by looking at the symbol. If you are confident, you can also make the inevitable neon repair yourself. Leaded glass is sometimes seen in vintage neon signs.

Keep scrolling if you have a neon sign acting up or are in disrepair.

Regarding Neon Signs

Most people know that light tubes are filled with low-pressure gas, called neon tubes. When exposed to a high voltage, neon gas begins to light brilliantly. Because they provide eye-catching displays, neon signs are suitable for indoor and outdoor applications.

To keep neon signs from malfunctioning, they require simple maintenance and recharging. They must also be manufactured of high-quality materials to survive the requisite 8 to 15 years. The average life expectancy of a sign’s transformer is 5 to 7 years. In comparison, larger or higher-quality transformers can last 10 to 15 years.

Can You Fix Neon Lights?

Even though neon tubing is presented as a cost-effective and long-lasting alternative for many organizations, it does have certain downsides. The critical question is how much does it cost to repair a neon sign? Nevertheless, to address your primary point quickly, yes, neon signs can be fixed. It is worth it or not, depending on the cause of the problem and how much the specialist charges you.

Repairing a small break costs roughly $50 for neon and $60 for argon gas because the tube must be cleaned before it can be fixed. A break can frequently ruin many feet of glass, so you may be better off having a new line constructed. Mercury fumes stain the glass on earlier signs that utilized argon gas.

Is it Possible to Repair Neon Signs? – Is it worth it?

We appreciate that assuring you that you won’t have to fix your neon sign is a risky move, and we won’t state you will never have to do it. Now, let’s go back to the main topic: how much does it cost to repair a neon sign, and is it worth investing the money?

If it’s a high voltage short, the neon sign repair will cost around $350. If a faulty transformer powers the tubing, the transformer will cost about $300, and the service call will cost around $350. If the neon is broken and has to be fixed or replaced, the neon sign repair would cost about $200—the replacement cost depending on the size of the affected tube. Furthermore, the removal and restoration of the affected neon would cost around $400.

In other circumstances, if a neon sign is made of high-quality materials, the problem will be obvious. If you are confident, you can also make certain repairs yourself. Nuts and bolts may be readily removed, cleaned, and replaced with new components when required.

Conclusion

To keep your neon signs blazing, make the transition today. Connect with electrical professionals to obtain the best one for you if you need help selecting the perfect product or making the most of this new technology.

If you’re a business owner, one of the few things you need to contemplate is creating a safe work environment. One way to accomplish this is by targeting your parking lot. As a business owner, you ought to go the extra mile to guarantee that your parking lot is maintained and has proper lighting. A well-illuminated parking lot adds to the professional impression of your business. This adds a sense of security for your customers and staff alike.

To begin with, you need to choose since there is a wide variety of parking lot light poles for you to select from. For example, parking lot lighting could be floodlights, spotlights, post lights, or landscaping lights. Again though, before settling on the lighting suitable for your business premises, first review the current parking lot lighting. Later you can establish what areas need improvement, noting the light poles’ intensity, color, uniformity, cost, and energy efficiency.

Choose the right spots

Now that you’ve chosen your parking lot light pole style, pick the correct spots for the parking lot pole. The first of many steps in a parking lot light pole installation involves picking proper sites for installing the poles. Remember that the entire zone should be adequately illuminated to prevent shaded regions in parked vehicles. Hence it’s always advised to install two light poles at different ends.

Taking care with the wiring

After picking relevant spots, you should target the lighting poles’ wiring. All the wires linking the light poles must not be exposed for safety reasons. Therefore, all required wiring works must be carried out before constructing the parking lot floor. To ensure power presence at all times, a power source station must be nearby.

Strong Bases

The next step is ensuring firmness and balance for the lighting pole, for which a concrete base is a requirement. The concrete should be rich in cement to ensure its rigidity and durability. Often, the length of the pole you’re placing is used to determine the height of the pier. After this, anchor bolts are inserted on the face of the pier while putting concrete in the formwork. These anchor bolts are responsible for holding the steel pole in place.

Mount the light poles

Once you’ve affirmed that the piers are well fixed, you can move to mount the light poles. You might need crane loaders for raising the poles vertically and onto the piers. The bolts and nuts must be carefully tightened to ensure. Once the pole has been erected, you can now proceed to connect it to the electricity supply source.

Better to be safe

During the entire parking lot light pole installation, one must take certain precautions. A qualified electrician should install the lights to avoid electric shock and ere. However, if you choose to do the installation yourself, don’t forget to wear protective gloves to prevent injury while installing. If there are any indications of smoke or fire in the wires or lights, turn off all power directly and report to relevant personnel or authorities.

Conclusion

Lastly, since there are potential safety hazards when working with electrical elements in wet weather. It would be safer not to install this light during rough weather to avoid any electrical shock and damage.

Have you got issues with your lighting system? Busted a bulb or got a broken transformer? Or do you need a change in your lighting style and signage? Or want a maintenance service to keep your lighting and signs up to date? Whatever the issue is, Nuer lighting is here to help you keep your lights brightening the atmosphere with their brilliant glow.

Finding a reliable and professional lighting contractor in a city like Chicago can be frustrating and arduous, especially when everyone can pose as an expert nowadays. However, there is no need to stress anymore. Being rated as one of the best lighting contractor in Chicago, Nuer lighting is here to light up your dark tunnel of worries with a stress-free service!

Things We Look After

Their services cover a wide range of electrical lighting duties, which you may see from the list given below:

• Gas station canopy lighting
• Parking lot pole light construction
• Indoor and Outdoor Lighting
• Specialty lighting
• Signage services
• Neon lighting or signage services
• Maintenance or repair services
• LED digital signage lighting services
• Channel lighting services

 

And a lot more! Nuer ensures to maintain the highest customer satisfaction with all of its services. It’s the reason why they are what they are today. Being one of the best lighting contractor, they go to lengths to keep the clients comfortable and content throughout the entire period of providing specific services according to their desires.

Why Not Go with the Best in the Business?

Nuer lighting works with its customers, keeping prices and power consumption into account and guaranteeing the best lighting at economical and stable rates.

LED Lighting, canopy lights, security lighting fixtures, light fittings, floodlights, and pole lights, to list a few, are the wide varieties of lights that are most desired and greatly sought after by clients.

There are many adjustable possibilities, but if there is anything you desire for your company that they don’t have, approach them. So they may tailor their vast, commercially available LED lighting solution to your specifications or come up with cost-effective lighting alternatives.

The Industry’s Rulers

Nuer lighting has been offering all forms of lighting strategies for their clients for ages, and they possess an organized and skilled crew that guarantees to provide the finest lighting services for all kinds of industries, large and small, and offer the greatest credible and budget-friendly lighting solutions for their company, allowing them to focus on providing the ideal lighting at some of the most cost-effective rates.

Nuer lighting values client contentment and goes above and beyond to guarantee that clients have the best possible service when collaborating with them. Their primary objective is to provide organizations in Chicago with the finest sustainable and inclusive lighting solutions imaginable.

Conclusion

Nuer lighting delivers commercial, industrial, outdoor, and indoor lighting and signage manufacturing, maintenance, and restoration services to propel your company forward. They go above and beyond to ensure that their clients’ signs and lights are always functional and attractive.

Neon signage is Americana tubes that wonderfully reflect the vintage mood of the 1930s and 1950s. Most neon signs throughout this period became so emblematic that they remain stylish to date, which is understandable. You could call them a classic. Though we’ve always witnessed those barely-alive signs which radiate a dismal glimmer or don’t operate whatsoever, they survive for a considerable period. It is never cool to do so.

Neon lighting is comprised of various components, each of which has a distinct life expectancy. But how long your neon sign can last in actuality? Continue scrolling to discover more about its lifespan.

Points to Ponder On

The lifespan of your neon sign is determined by two factors:

• Condition of the transformer
• Gas shelf life and color coating

The Lifespan of a Transformer

Your neon sign’s transformer should last between eight and fifteen years. The figures are totally reliant on when and how much you are using the signs. Those signs that are displayed inside, away from direct exposure, can last longer technically than those that are open to the environment on a regular basis.

Direct sunlight can harm transformers, thus if they’re installed outside and unprotected from the sunlight, they won’t last as long as interior signage. But don’t fret, there are many neon sign repair companies out there, search the reliable ones in your area!

Function

Conventional or LED neon lights subjected to a fluctuating electricity supply, as well as flickering neon signs, have a shorter life expectancy. Whenever a neon sign flickers or blinks, the elements are susceptible to more wear and tear, shortening their lifespan. Switching from flickering and stationary is an option, and flicker options must be used cautiously.

Tubular Life

The neon signs’ brilliant neon glass tubing normally endures for eight to fifteen years. You might acquire your money’s value if you install it in the appropriate location and keep it maintained. Coatings can stay up to ten years, based on the intensity and use of the sign.

The phosphorous coverings that supply neon lights their colors do not stay forever, spanning approximately seven and ten years, nevertheless, a neon sign repair professional can recoat them. The amount and strength with which the sign is utilized can influence the coating’s life span.

Energy Source

The length of time the sign typically lasts can sometimes be impacted by faults with an inconsistent source of energy. You must alert the contractor regarding this when the sign is being installed. The system will be inspected by an expert neon sign producer to verify that it is up to par.

Make Repairs               

So how long your neon sign can last with repairs? It is feasible to repair or recoat a neon sign’s glass tube. You may also change the transformer and add extra gas. Each of these components will prolong the life of the neon sign.

Buying neon lights is the easiest approach for company owners to create that wonderfully shining entrance. If you’re one of those individuals, keep in mind that you exclusively purchase neon signs from reputable retailers. Only if you have high-quality neon signs then they are generally safe and are cost-effective.

Clean, Clean, and Clean!

The most crucial element in increasing the longevity of your signage is to care for them properly. The more grit and grime accumulates in your neon lights, the less functional they become. It will soon become unattractive and boring.

Make sure the sign is disconnected when you begin wiping it. Even though it appears to be benign, it is linked to a transformer that might deliver a jolt. A vacuum machine or sweeping with a brush such as a paint brush can be used to eradicate dust. If the signs have gotten soiled, you might have to spritz them using an ammonia-based solution and wipe the dirt away with a delicate cloth.

Conclusion

Nuer Lighting offers a variety of lighting solutions. Whether you’re looking for public lighting, park lights, interior lights, or industrial lights. We have it all. We also offer one on one consulting on which lights would be more suitable for your desired location. Our neon signs are the rage and we also offer repair services, it is a complete package for our customers! Not only do they get to buy, but also obtain repairing or maintenance services from the very same place. Contact us now and get your business shining!